MT671DF Double Flank Gear Rolling Tester
Application
- Standard type
- Measuring by manual drive standard component to rotate the workpiece
- Flank meshing on flank
Specifications
※ Probes : 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm
Unit: mm
| Center Distance | Center height |
Horizontal |
Vertical |
Engagement | L/W/H | Morse Tapper |
Basic weight |
Max | Weight loaded (KGS.) |
|---|---|---|---|---|---|---|---|---|---|
| 200 | 90 | 0.005 | 0.006 | 0.01↓ |
490/180 /175 |
MT2C14 | 30 | Ø180 | 25 |
| 300 | 90 | 0.005 | 0.006 | 0.01↓ |
590/195 /175 |
MT2C14 | 40 | Ø180 | 25 |
| 400 | 130 | 0.006 | 0.008 | 0.01↓ |
730/205 /241 |
MT3C18 | 62 | Ø260 | 60 |
| 600 | 130 | 0.008 | 0.010 | 0.01↓ |
930/220 /250 |
MT3C18 | 95 | Ø260 | 60 |
| 800 | 130 | 0.008 | 0.010 | 0.01↓ |
1130/220 /250 |
MT3C18 | 103 /120 /156 |
Ø260 | 60 |
| 1000 |
130 |
0.010 | 0.012 | 0.01↓ |
1330/220 /262 |
MT3C18 | 120 /138 /175 |
Ø260 /Ø400 /Ø600 |
60 /85 /85 |
※ Dial gauge is not included.
※ Beyond these specifications can be special ordered.
