EMT1S625YS
Features
- X.Y axial mono-slide type
- X axial w/ drive wheel
- Y axial w/slide table
Specifications
Unit: mm
| Center distance | Center height |
Horizontal |
Vertical | L/W/H | Morse Tapper | Basic weight (kgs) |
Maximum Swing | Weight loaded (kgs) |
|---|---|---|---|---|---|---|---|---|
| 300 | 90 | 0.008 | 0.008 | 590/195/175 | MT2C14 | 40 | Ø180 | 25 |
| 400 | 130 | 0.010 | 0.010 | 730/205/241 | MT3C18 | 73 | Ø260 | 60 |
| 600 | 130 | 0.012 | 0.012 | 930/220/250 | MT3C18 | 97 | Ø260 | 60 |
| 800 | 130 | 0.015 | 0.015 | 1130/220/250 | MT3C18 | 106/124/160 | Ø260 | 60 |
| 1000 |
130 /200 /300 |
0.015 | 0.015 |
1330/220/262 |
MT3C18 | 123/141/177 | Ø260/Ø400/Ø600 | 60 /85 /85 |
※ Center height 200,300 can be used with MT4C25 ----Customer optional.
※ Dial gauge is not included.
※ Center distance over 400 to 1,000 can be used with Center Height 200 or 300, but using
200 center height must reduce its center distance 80 and 300 Center
height reduce 200, due to different l center height will also have the different length of
tailstock.
※ Use linear scale its center height at least 130mm.
※ Beyond these specifications can be special ordered.
※Use Z2 axial its center height at least 130mm.
