MT526
※ Standard type
Unit：mm
| Center Distance | Center Height |
Horizontal Parallelism |
Vertical Parallelism | L / W / H | Morse tapper |
Basic (KGS.) |
Maximum Swing |
Weight Loaded (KGS.) |
|---|---|---|---|---|---|---|---|---|
| 200 | 90 | 0.005 | 0.006 | 490/180/175 | MT2C14 | 27 | Ø180 | 25 |
| 300 | 90 | 0.005 | 0.006 | 590/195/175 | MT2C14 | 36 | Ø180 | 25 |
| 400 | 130 | 0.006 | 0.008 | 730/205/241 | MT3C18 | 68 | Ø260 | 60 |
| 600 | 130 | 0.008 | 0.010 | 930/220/250 | MT3C18 | 91 | Ø260 | 60 |
| 800 | 130 | 0.008 | 0.010 | 1130/220/250 | MT3C18 | 99/117/153 | Ø260 | 60 |
| 1000 |
130 /200 /300 |
0.010 | 0.012 |
1330/220/262 (338/442) |
MT3C18 | 116/134/170 |
Ø260 / Ø400 / Ø600 |
60/85/85 |
| 1200 |
130 /200 /300 |
0.010 | 0.012 |
1530/220/262 (338/442) |
MT3C18 | 164/182/218 |
Ø260 / Ø400 / Ø600 |
60/85/85 |
| 1500 |
200 /300 |
0.015 | 0.015 |
1830/220/282 (358/462) |
MT4C18 | 223/241/277 |
Ø400 / Ø600 |
85/85 |
| 2000 |
200 /300 |
0.020 | 0.020 |
23600/220/302 (378/482) |
MT4C18 | 339/357/393 |
Ø400 / Ø600 |
85/85 |
※ Center height 200,300 can be used with MT4C25 ----Customer optional.
※ Dial gauge is not included.
※ Center distance over 400 to 1,000 can be used with Center Height 200 or 300, but using 200 center height must reduce its center distance 80 and 300 Center height reduce 200, due to different center height will also have the different length of tailstock.
※ Beyond these specifications can be special ordered, Center distance maximum 3000 mm.
※Use Z1 & Z2 axial its center height at least 130mm.
